Lotus Esprit S1 S2 S3 Parts

[Lotus Esprit Emporium]

NEW Lotus Esprit S1-3 Parts
All hand laid fiberglass or carbon fiber construction
parts will be fabricated upon order, pics available upon request
i run a porsche shop in new york at: www.porschepalace.net
Yet the wedge shape cars are my passion, i collect and restore them
the esprit parts i do for my own pleasure and thought i would pass it on
i have made many parts for lotus owners from all of the car clubs in the US

if the part you need is not listed please contact me, 90% of the time i can fabricate it
thank you- gene


S1FB Front Bumper S1/S2 (flat style) 250.00
S2PFB Front Bumper S2 1979 (player style) 350.00
S3TFB Front Bumper S3 (turbo style) 350.00
S2RBR Rear Bumper late S1/S2 250.00
S2RBL Rear Bumper (light weight) 250.00
S2RBW Rear Wedge (behind rear bumper) 200.00
S2BWC Rear Bumper & Wedge (1pc) 400.00
S3RB Rear Bumper S3 (turbo style) 350.00
S2RV Rear Valance S2 (muffler Cover) 300.00
S3RV Rear Valance S3 (muffler Cover) 300.00
S1FS Front Spoiler S1/S2 (U style) 350.00
S3FS Front Spoiler S3 (87 turbo) Fabricating mold now
S3TR Rocker Panels / Turbo Sills S2/S3 600.00
S3RC Rear Spoiler/ Tail Light Housing (turbo)
DES Intake Scoops (dog ears) 50.00
DESCF Intake Scoops (dog ears)-carbon fiber 100.00
S2CC Center Console S1/S2
S2CCC Center Console S1/S2 – carbon fiber
S2CLCF Center Console Lid (arm rest)—carbon fiber
S2SI Console Shifter Insert (window button plate)
S3L Louvers/Rear Hatch 500.00
S3LCF Louvers/Rear Hatch – carbon fiber 1000.00
S1GC Gas Cap Cover S1/S2 – carbon fiber 25.00

[Lotus Esprit Emporium]

if you need a re dash installed i have 2 left, i was going to redo a dash we had at the shop and list on ebay, just to cut down on clutter. we have been to busy to start producing them again, its a long process. the vinyl / plastic mix is same used in 1985 1/2 and on porsche. not all dashboards can be repaired. would be best if you can email me pics of your dash
thank you - gene
porschepalace@optonline.net
845-712-5120

[Lotus Esprit Emporium]

its make of the same material semi ridgid shell. we do not sugest a home install for dash should be taken out, one of our customers did install with out taking dash out but its realy the wrong aproach. if the dash isnt warped to bad first we have to repair the damage, in some cases all is stripped off, other times only parts, depends on damage. this isnt a cap and not applied with silicone, this will be permently glued as seen in pics it must be applied with clamps and preasure. do to the ridge in the back of dash near windshield we strongly suggest taking dash out. avarage cost of redash and application is 200-250 depends on damage. pics of your dash would be very helpfull

[WayneB]

Tony, please email or pm him .

This forum is not the place to voice any issues you have with them.

Wayne

[Tony K]

Hi Wayne,

I feel it is relevant and worthwhile to call it out in public. Some guy comes on here hawking his wares and happens to be using a photo of a forum member's car in a dishonest way . . . on most forums, people appreciate BS such as this being aired; the issue and relevance here is the honesty and credibility of someone who is trying to sell goods to other members of this forum.

- Tony

[WayneB]

Hi Tony,
Thanks for being concerned about other fellow forum members wellbeing , but as you are addressing an issue concerning a Porsche 944 wouldnt you be better voicing your complaints on a Porsche forum(or just emailing and pming him as suggested)?
I personally dont like reading posts slagging off other forum members and encourage all members to settle any differences in private.
If you dont like my views and/or the way I'm handling this please contact Martin.
thanks,
Wayne:)